| DTC Strategy |
- Check a status of data which is receiving from PCM
|
- The contact state for connector
- Input power for smart key unit (PIC IMMO)
- Check a noise in the communication line between EMS and SMK
- Smart key Unit (PIC UNIT)
- PCM
|
| Enable Conditions |
- In the IGN ON Status. It set DTC because of data corruption in the communication line between EMS and SMK
|
| Threshold value |
- Data fault which is receiving from PCM
|
| Diagnostic Time |
- The DTC is set, if the error is occurring 5 times
|
| DTC Erasing Time |
- The DTC is deleted, if the communication data is recovered to the normal status
|