System Operation Spec - Rear Sensor

When the system has the power (after IGN ON and R gear), MICOM checks every sensor channel. In case it is not find any error, it sounds 300ms buzzer 500ms afterward. But it finds any error even a sensor, it sounds buzzer corresponding fault sensor instead of initial starting alarm. Function for normal mode entrance is as below

Fig 1: Rear Sensor System Operation Specification Chart

Courtesy of HYUNDAI MOTOR AMERICA

With R Gear, system function is as below

Fig 2: Rear Sensor System Operation Specification Chart (With R Gear)

Courtesy of HYUNDAI MOTOR AMERICA

With R gear releasing, system function is as below

Fig 3: Rear Sensor System Operation Specification Chart (With R Gear Releasing)

Courtesy of HYUNDAI MOTOR AMERICA

*acceptable error range on waveform ±10%