Removal and Installation

Disconnect the battery negative terminal.
Tightening torque:

4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Remove the steering wheel.
(Refer to Steering System - "REPAIR PROCEDURES " )
Loosen the screws and then remove the cover (A).

Fig 1: Removing Cover Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the steering wheel remote control switch connectors (A).

Fig 2: Disconnecting Steering Wheel Remote Control Switch Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautions of fixed clip.

Fig 3: Removing Steering Wheel Remote Control Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the smart cruise control switch (A).

Fig 4: Removing Smart Cruise Control Switch
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.