Phone Setup

All Bluetooth®-related operations can be performed in PHONE menu.

1. Push the "SETUP" button to enter SETUP mode.
   Fig 1: Screen Display - Enter Setup Mode

   Courtesy of HYUNDAI MOTOR AMERICA
2. Select "PHONE" item by using, button, then push the "OK" button.
   Fig 2: Screen Display - Phone

   Courtesy of HYUNDAI MOTOR AMERICA
3. Select desired item by using, button, then push the "OK" button.
   • Pairing a phone

     Before using Bluetooth® features, the phone must be paired (registered) with the audio system. Up to 5 phones can be paired with the system.

   NOTE:

   • The pairing procedure of the phone varies according to each phone model. Before attempting to pair phone, please see your phone's User's Guide for instructions.
   • Once pairing with the phone is completed, there is no need to pair with that phone again unless the phone is deleted manually from the audio system (refer "Deleting a Phone" section) or the vehicle's information is removed from the phone.
   1. Press "SETUP" button to enter SETUP mode.
   2. Select "Phone", then "Pair" in PHONE menu.
   3. The audio displays "searching -- passkey: 0000"
   4. Search the Bluetooth® system on your phone. Your phone should display your [vehicle model name] on the Bluetooth® device list. Then attempt pairing on your phone.
      NOTE: If the phone is paired to two or more vehicles of the same model, i.e. both vehicles are HYUNDAI AZERA, some phones may not handle Bluetooth® devices of that name correctly. In this case, you may need to change the name displayed on your phone from AZERA to AZERA1 and AZERA2.
      Refer to your phone's User's Guide, or contact your cellular carrier or phone manufacturer for instructions.
   • Connecting a phone

     When the Bluetooth® system is enabled, the phone previously used is automatically selected and re-connected. If you want to select different phone previously paired, the phone can be selected through "Select Phone" menu.

     Only a selected phone can be used with the hands-free system at a time.

   1. Press "SETUP" button to enter SETUP mode.
   2. Select "Phone", then "Select" in PHONE menu.
   3. Select desired phone name from the list shown.
      • Deleting a Phone

        The paired phone can be deleted.

      • When the phone is deleted, all the information associated with that phone is also deleted (including phonebook).
      • If you want to use the deleted phone with the audio system again, pairing procedure must be completed once more.
   1. Press "SETUP" button to enter SETUP mode.
   2. Select "Phone", then "Delete" in PHONE menu.
   3. Select desired phone name from the list shown.
      • Changing Priority

        If several phones are paired with the audio system, the system attempts to connect following order when the Bluetooth® system is enabled:

        1. "Priority" checked phone.
        2. Previously connected phone
        3. Gives up auto connection.
   1. Press "SETUP" button to enter SETUP mode.
   2. Select "Phone", then "Priority" in PHONE menu.
   3. Select desired phone name from the list shown.
      • Turning Bluetooth® ON/OFF

        Bluetooth® system can be enabled (ON) or disabled (OFF) by this menu.

      • If Bluetooth® is disabled, all the commands related to Bluetooth® system prompts whether you wish to turn Bluetooth® ON or not.
   1. Press "SETUP" button to enter SETUP mode.
   2. Select "Phone", then "BT Off" in PHONE menu.