LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Fender >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

CAUTION:
  • Be careful not to damage the fender and body.
  • When removing the clips, use a clip remover.
  1. Remove the head lamps.

    (Refer to Body Electrical System - "HEAD LAMPS ")

  2. Loosen the mud guard mounting screws.
    Fig 1: Mud Guard Mounting Screws
    G12091228Courtesy of HYUNDAI MOTOR AMERICA
  3. After loosening the mounting screws and clips, then remove the side sill molding (A).
    Fig 2: Locating Side Sill Molding
    G12091229Courtesy of HYUNDAI MOTOR AMERICA
  4. Using a screwdriver or remover, remove the fender garnish (A).
    Fig 3: Locating Fender Garnish With Bolt
    G12091230Courtesy of HYUNDAI MOTOR AMERICA
  5. Detach the clips and then remove the fender side cover (A).
    Fig 4: Locating Fender Side Cover With Bolts
    G12091231Courtesy of HYUNDAI MOTOR AMERICA
  6. Using a screwdriver or remover, remove the delta garnish (A).
    Fig 5: Locating Delta Garnish
    G12091232Courtesy of HYUNDAI MOTOR AMERICA
  7. After loosening the mounting screws and bolt, then remove the front bumper side mounting bracket (A).
    Fig 6: Locating Front Bumper Side Mounting Bracket With Mounting Screws And Bolt
    G12091233Courtesy of HYUNDAI MOTOR AMERICA
  8. After loosening the fender mounting bolts and nut, then remove the fender (A).
    Fig 7: Locating Fender With Mounting Bolts And Nut
    G12091234Courtesy of HYUNDAI MOTOR AMERICA
  9. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals