LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield Glass >> Repair Procedures >> Replacement >> [Removal]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement: [Removal]

CAUTION:
  • Put on gloves to protect your hands.
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the front pillar trim.

    (Refer to Interior Trim - "FRONT PILLAR TRIM ")

  2. Remove the inside rear view mirror assembly.

    (Refer to Mirror - "INSIDE REAR VIEW MIRROR ")

  3. Remove the rain sensor.

    (Refer to Body Electrical System - "RAIN SENSOR ")

  4. Remove the cowl top cover.

    (Refer to "COWL TOP COVER ")

  5. Remove the windshield glass deicer connector.
  6. Using a screwdriver or remover, remove the windshield glass upper molding (A) and windshield glass side molding (B).
    Fig 1: Locating Windshield Glass Upper Molding And Windshield Glass Side Molding
    G12091500Courtesy of HYUNDAI MOTOR AMERICA
  7. Cut out the windshield sealant using the sealant cutting tool (09861-31100).
    Fig 2: Cutting Out Windshield Sealant Using Sealant Cutting Tool (09861-31100)
    G12091501Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the windshield glass (B) carefully using the glass holder (A).
Fig 3: Removing Windshield Glass Using Glass Holder
G12091502Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals