LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle Assembly >> Front Hub - Axle >> Repair Procedures >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Reassembly

  1. Install the hub bearing to the knuckle assembly.
    1. Lay the knuckle assembly (A) on press.
    2. Lay a new hub bearing upon the knuckle assembly (A).
    3. Lay a suitable adapter (B) upon the hub bearing.
    4. Install the hub bearing to the knuckle assembly by using press.
    Fig 1: Installing Hub Bearing To Knuckle Assembly
    G12089243Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
    • Always use a new wheel bearing assembly.
  2. Install the hub assembly to the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter.
    2. Lay the knuckle assembly (B) upon the hub assembly (A).
    3. Lay a suitable adapter upon the hub bearing.
    4. Install the hub assembly (A) to the knuckle assembly (B) by using press.
    Fig 2: Installing Hub Assembly To Knuckle Assembly
    G12089244Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
  3. Install the snap ring (A).
Fig 3: Installing Snap Ring
G12089245Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals