Repair Procedures: Installation

Install the CVVT assembly.
Tightening torque:

64.7 ~ 76.5 N.m (6.6 ~ 7.8 kgf.m, 47.7 ~ 56.4 lb-ft)

Fig 1: CVVT Assembly
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- Install camshaft-inlet to dowel pin of CVVT assembly.
  At this time, attend not to be installed to oil hole of camshaft-inlet.
- Hold the hexagonal head wrench portion of the camshaft with a vise, and install the bolt and CVVT assembly.
- Do not rotate CVVT assembly when camshaft is installed to dowel pin of CVVT assembly.
- A: LH exhaust CVVT
- B: LH intake CVVT
  
  Fig 2: CVVT Assembly (LH Exhaust/Intake)
  Courtesy of HYUNDAI MOTOR AMERICA
- C: RH intake CVVT
- D: RH exhaust CVVT
Fig 3: CVVT Assembly (RH Exhaust/Intake)
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When installing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench at position A.

Fig 4: Rotating Camshaft Using Wrench
Courtesy of HYUNDAI MOTOR AMERICA
Install the timing chain.
(Refer to Timing System - "TIMING CHAIN ")