Repair Procedures: Replacement
- Disconnect the negative (-) battery terminal.
- Remove the crash pad left side cover (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Remove the extension cover (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Remove the fuse box cover (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Remove the crash pad lower cover (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Disconnect the diagnosis connector (A) and then remove the crash pad lower cover.
Courtesy of HYUNDAI MOTOR AMERICA
- Remove the shower duct (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Disconnect the mode control actuator connector (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Loosen the mounting screw and then remove the mode control actuator (B).
- Installation is the reverse order of removal.