LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Temperature Control Actuator >> Repair Procedures >> Driver Temperature Control Actuator
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Temperature Control Actuator

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad left side cover (A).
    Fig 1: Locating Crash Pad Left Side Cover
    G12093436Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the extension cover (A).
    Fig 2: Locating Extension Cover
    G12093437Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fuse box cover (A).
    Fig 3: Locating Fuse Box Cover
    G12093438Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the crash pad lower cover (A).
    Fig 4: Locating Crash Pad Lower Cover With Mounting Screws
    G12093439Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the diagnosis connector (A) and then remove the crash pad lower cover (B).
    Fig 5: Locating Crash Pad Lower Cover And Diagnosis Connector
    G12093440Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the shower duct (A).
    Fig 6: Locating Shower Duct
    G12093441Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the BCM.

    (Refer to Body Electrical System - "REMOVAL ")

  9. Disconnect the temperature control actuator connector (A).
    Fig 7: Locating Temperature Control Actuator And Connector
    G12093442Courtesy of HYUNDAI MOTOR AMERICA
  10. Loosen the mounting screw and then remove the temperature control actuator (B).
scientia non olet · About LEMON Manuals