LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Driver Airbag (DAB) Module And Clock Spring >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the driver airbag module mounting bolts (A).
    Fig 1: Locating Driver Airbag Module Mounting Bolt
    G12089579Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the wiring fixing clip (C) and disconnect the horn connector (A).
    Fig 2: Locating Driver Airbag Module Connector, Horn Connector And Wiring Fixing Clip
    G12089580Courtesy of HYUNDAI MOTOR AMERICA
  4. Release the connector locking pin, then disconnect the driver airbag module connector (B).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover facing up.
  5. Remove the steering wheel and steering wheel column shroud.

    (Refer to Steering System - "MDPS ASSEMBLY ")

    Fig 3: Steering Wheel And Steering Wheel Column Shroud Screws
    G12089581Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 4: Clock Spring And Horn Connector
    G12089582Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals