Repair Procedures: Installation

Fix the band cable of FEM joint connector (B) and connect the smart cruise control unit connector (A).

Fig 1: Connecting Smart Cruise Control Unit Connector
Courtesy of HYUNDAI MOTOR AMERICA
Install the smart cruise control unit assembly (A) on the vehicle.
Tightening torque

Bolts:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Nuts:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

Fig 2: Installing Smart Cruise Control Unit Assembly On Vehicle
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: When installing the sensor, align the direction of sensor with the vehicle motion vector and adjust the upside of sensor horizontally using level meter (A).

Fig 3: Adjusting Upside Of Sensor Horizontally Using Level Meter
Courtesy of HYUNDAI MOTOR AMERICA
Align the smart cruise control sensor.
(Refer to Smart Cruise Control System - "Smart Cruise Control (SCC) Sensor Alignment ")
Install the bumper.
(Refer to Body - "FRONT BUMPER COVER ")