| DTC Strategy |
|
- Poor connection
- Open or short power/ground in signal circuit
- S1
|
| Case1 |
Enable Conditions |
- Closed loop fuel control
- Fuel factor changes is higher than 0.1
|
| Threshold Value |
- Sensor voltage is between 2.48 and 2.51
|
| Case2 |
Enable Conditions |
- Target lambda is lower than -3% or Reference Target lambda is higher than 3%
|
| Threshold Value |
- Sensor voltage is between 2.48 and 2.51
|
| Case3 |
Enable Conditions |
- Reference Cell Voltage is lower than 0.43V or Reference Cell Voltage is higher than 0.47V
|
| Threshold Value |
- Reference Cell Voltage is lower than 1V or Reference Cell Voltage is higher than 4V
|
| Diagnostic Time |
|
| MIL ON Condition |
|