Repair Procedures: Adjustment

Adjusting method for T/M control cable

1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
2. Connect room side lever (A) and control cable (B).
   Fig 1: Connecting Room Side Lever And Control Cable

   Courtesy of HYUNDAI MOTOR AMERICA
3. Push cable to "F" direction shown in illustration below to eliminate FREE PLAY.
4. Tighten adjusting nut (A).

   Tightening torque  :

   9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

   Fig 2: Pushing Cable To F

   Courtesy of HYUNDAI MOTOR AMERICA
5. After adjusting, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of room lever.