Select cable adjustment

Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.

Fig 1: Removing Select Cable Snap Pin
Courtesy of HYUNDAI MOTOR AMERICA
Shift the shift lever to 3rd gear.
Move the slide clip (B) of guide member (A) in the direction as shown in the illustration below.

Fig 2: Moving Slide Clip Of Guide Member
Courtesy of HYUNDAI MOTOR AMERICA
Install the select cable (A).

Fig 3: Installing Select Cable
Courtesy of HYUNDAI MOTOR AMERICA
Insert the slide clip (A) in the direction as shown in the illustration below and then install the snap pin (B).

Fig 4: Inserting Slide Clip

Courtesy of HYUNDAI MOTOR AMERICA