Repair Procedures: Removal

Remove the floor Interior console assembly.
(Refer to "FLOOR CONSOLE ")
Remove the air duct (A).

Fig 1: Removing Air Duct
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cover (A).

Fig 2: Removing Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the select cable (B) by removing the snap pin (A).

Fig 3: Removing Select Cable And Snap Pin
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift cable (B) after removing the clip (A).

Fig 4: Removing Shift Cable And Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cable guide (A) from lever assembly after pulling in the direction of the arrow.

Fig 5: Removing Cable Guide From Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lever assembly (B) by removing the bolts (A-4ea).
Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 6: Removing Shift Lever Assembly And Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the boots (A) and knob (B) from the lever assembly.

NOTE: Rotating counter-clockwise shift lever knob (B).

Fig 7: Rotating Counter-Clockwise Shift Lever Knob

Courtesy of HYUNDAI MOTOR AMERICA

Fig 8: Removing Boots And Knob From Lever Assembly

Courtesy of HYUNDAI MOTOR AMERICA