Repair Procedures: Installation

1. Install in the reverse order of removal.
   NOTE:

   • The vertical installation angle of the unit must be within 2°± 0.4°. (not 0 degree)

   
   * Before installing the bumper onto the vehicle, measure the vertical angle of the unit with a protractor as shown.

   Fig 1: Measuring Vertical Angle Of Smart Cruise Control Unit With Protractor

   Courtesy of HYUNDAI MOTOR AMERICA
2. Align the smart cruise control sensor.

   (Refer to "SMART CRUISE CONTROL (SCC) ALIGNMENT ")

3. Install the bumper cover.

(Refer to "FRONT BUMPER COVER ")