LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Santa Fe Sport 2.0T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the second row seat.

    (Refer to Body - "REAR SEAT ")

  3. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    Fig 1: Removing Rear Seat LH Air Duct Mounting Nuts
    G12055443Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the seat cable bracket (A) after loosening the mounting nuts.
    Fig 2: Removing Seat Cable Bracket Mounting Nuts
    G12055444Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel pump service cover (A) after loosening the mounting screws.
    Fig 3: Removing Fuel Pump Service Cover Mounting Screws
    G12055445Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the fuel tank pressure sensor (A) after disconnect the connector (B).
Fig 4: Removing Fuel Tank Pressure Sensor
G12055446Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals