| Liftgate start |
2 times |
2 times |
When Liftgate is triggered by Remote Control or Liftgate Console Switch |
| Liftgate start |
n.a. |
n.a. |
When Liftgate is triggered by Liftgate Inner Switch or Liftgate Outer Handle Switch |
| Liftgate stop |
n.a. |
n.a. |
|
| System error |
3 Times |
- |
PCU/Liftgate antiplay active, over-/undervoltage condition, End position-/position error, spindle error, CAN error, Latch closed when Liftgate open |
| Liftgate not closed |
10 times |
10 times |
Latch Lock Switch not present |
| During Calibration run |
Continuous ON-OFF beeping |
n.a. |
Activate buzzer but not Liftgate Hazard |
| Max. End Position learned |
n.a. |
2 times |
Buzzer confirms learning finished |
| Max. End Position deleted |
1 time |
n.a. |
Buzzer confirms "position deleted" |
| Car is moving with open Liftgate |
10 times |
n.a. |
Liftgate open AND Speed >3km/h |
| Garage Position saved |
2 times |
n.a. |
Buzzer confirms "New Garage Position" |