Repair Procedures: Removal
CAUTION:
- After replacing with a new power liftgate module, check for DTC code at all times.
If DTC code B24B0 exists, perform power liftgate mode change.
(Refer to "TROUBLESHOOTING ")
- After replacing with a new power liftgate module, perform the system initialization.
(Refer to "TROUBLESHOOTING ")
- Before delivery to customer, operate the power liftgate to be sure that there is no warning sound.
- Disconnect the negative (-) battery terminal.
- Remove the rear left luggage side trim.
(Refer to INTERIOR TRIM . )
- Remove the power liftgate unit connectors after loosening mounting nuts (2EA).