Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the following items;
- Sub frame assembly.
(Refer to "SUB FRAME ")
- Front muffler.
G 3.3 GDI (Refer to "FRONT MUFFLER ")
- Drive shaft assembly.
(Refer to "FRONT DRIVESHAFT ")
- Sub frame assembly.
- Remove the propeller shaft (A).
Tightening torque:
49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)
- Loosen the transfer upper & lower mounting bolts. (transfer side → transaxle side)
- Loosen the transfer lower mounting blot. (transaxle side → transfer side)