LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle Control System - 2.4L (Except HEV) >> Transaxle Control Module (TCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the negative (-) battery cable.
  3. Disconnect the TCM connector (A).
    Fig 1: Disconnecting TCM Connector
    G11995710Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the battery.

    (Refer to Engine Electrical System - "BATTERY ")

  5. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  6. Remove the TCM (A) after removing the bolt and nut.

    TCM installation bolt/nut: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 2: Locating TCM Bolt And Nut
    G11995711Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals