Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to: Body - "CRASH PAD LOWER PANEL ").
Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a nut and a bolt.

Fig 1: Removing Immobilizer Unit Nut And Bolt
Courtesy of HYUNDAI MOTOR AMERICA