Repair Procedures: Installation

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
NOTE:
- Adding Automatic Transaxle Fluid (ATF).
  (Refer to: Hydraulic System - "FLUID ").
- Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
  (Refer to: Automatic Transaxle Control System - "REPAIR PROCEDURES ").
- Replace the gasket (A) before reinstalling the valve body cover.
  
  Fig 1: Identifying Gasket
  Courtesy of HYUNDAI MOTOR AMERICA