Adjusting Method for T/M Control Cable
WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure vehicle Does Not roll before setting room side shift lever and T/M side Manual Control Lever to "N" position.
- Connect room side lever (A) and control cable (B).
- Push cable to "F" direction displayed to eliminate FREE PLAY.
- Tighten Adjusting Nut (A).
Tightening Torque:
9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)
- After adjusting, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of room lever.