Repair Procedures: Removal

Remove the valve body assembly.
(Refer to Valve body System - "VALVE BODY ")
Disconnect the input & output speed sensor connector (A) from the main wiring.
Remove the input & output speed sensor (B) after removing the bolts (2 ea).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Disconnecting Input & Output Speed Sensor Connector From Main Wiring

Courtesy of HYUNDAI MOTOR AMERICA