October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.

Fig 1: Disconnecting Crankshaft Position Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Crankshaft Position Sensor Connector Location
Courtesy of HYUNDAI MOTOR AMERICA