LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Button Engine Start System) >> Button Engine Start System >> Description and Operation >> Description >> Terminal And Starter Relays
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminal And Starter Relays

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Relays will be used to switch the terminals ACC/IGN1/IGN2. Those normally-open relays will be driven by the SMK unit and located either in the passenger or engine compartment depending on the vehicle architecture.

Only one relay coil is connected to the terminal outputs of the SMK unit.

Those relays should integrate a resistor connected in parallel to the coil in order to reduce the transients during commutation.

scientia non olet · About LEMON Manuals