LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (Automatic Transaxle Control System) >> Shift Lever >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console.

    (Refer to: Body - "FLOOR CONSOLE ASSEMBLY ").

  2. Disconnect the connector (A).
    Fig 1: Identifying Connector
    G10750279Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the shift control cable (A).
    Fig 2: Locating Shift Control Cable
    G10750280Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the AT lever (Shift Lever) assembly (A) by removing the bolts (4EA).

    Tightening Torque: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Fig 3: Removing AT Lever (Shift Lever) Assembly
    G10750281Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.
    NOTE: Make sure vehicle Does Not roll before setting room side shift lever and Automatic Transaxle (AT) side.
scientia non olet · About LEMON Manuals