LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (PHEV) >> Shift Cable >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air Cleaner ")
  2. Battery and battery tray. (Refer to COMPONENTS )
  3. Remove the nut (A) from the manual control lever.
  4. Remove the shift cable (B) from the bracket (C) at transaxle side.
    Fig 1: Locating Shift Lever Components
    G11631382Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the floor console assembly. (Refer to Body - "Floor Console ")
  6. Remove the air duct (A).
    Fig 2: Shift Lever Air Duct
    G11631383Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the shift cable (A).
    1. Disconnect the cable bracket from the shift lever after pushing the lock.
    2. Disconnect the cable holer (A) from the shift lever.
    Fig 3: Disconnecting Shift Cable
    G11631384Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the airbag module. (Refer to Restraint - "Airbag Module ")
  9. Disconnect the shift cable retainer (B) after removing the mounting nut (A).
  10. Remove the shift cable by pulling it toward the interior.
    Fig 4: Locating Shift Cable Retainer And Mounting Nut
    G11631385Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals