Repair Procedures: Removal

Turn ignition switch OFF.
Disconnect the negative (-) battery cable.
Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "AIR CLEANER ")
Disconnect the TCM connector (A).

Fig 1: Disconnecting TCM Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the TCM connector (B).

Fig 2: Disconnecting TCM Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fixing clip (A) of wiring.

Fig 3: Removing Wiring Fixing Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the TCM (A) after removing the mounting nuts and bolts (B).
TCM installation nut:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 4: Removing TCM Mounting Nuts And Bolts
Courtesy of HYUNDAI MOTOR AMERICA