LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel Delivery System - 1.6L >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Remove the rear seat.

    (Refer to Body - "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A).
    Fig 1: Locating Fuel Pump Service Cover
    G12039484Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump control module connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel pressure sensor connector (C).
  6. Disconnect the fuel feed tube quick connector (D) and the vapor tube quick-connector (E).
    Fig 2: Locating Connectors
    G12039485Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the locking ring (A) by using the special service tool [No.: 09310-B8100].
Fig 3: Locating Locking Ring
G12039486Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: Locating Fuel Pump Control Module
G12039487Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals