Repair Procedures: Removal

1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
2. Remove the air duct.

   (Refer to Engine Mechanical System - "AIR CLEANER ")

3. Disconnect the TCM connector (A).
   Fig 1: Locating TCM Connector

   Courtesy of HYUNDAI MOTOR AMERICA
4. Remove the TCM (A) after removing the bracket bolt (B-2ea).

Tightening torque: 

9.8 ~ 11.8 N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 2: Locating TCM And Bracket Bolt

Courtesy of HYUNDAI MOTOR AMERICA