Repair Procedures: Installation

[Gasoline 2.0 GDI] 

1. Install in the reverse order of removal.

NOTE:

1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
2. Smear and cover splines (B) with molybdenum type high pressure grease.

   GREASE SPL-1 or equivalent

   Fig 1: Locating O-Ring

   Courtesy of HYUNDAI MOTOR AMERICA
3. Apply grease around the oil seal (C).
   Fig 2: Applying Grease Around Oil Seal

   Courtesy of HYUNDAI MOTOR AMERICA
4. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.

Fig 3: Installing Propeller Shaft To Runout Marking

Courtesy of HYUNDAI MOTOR AMERICA

[Gasoline 1.6 T-GDI] 

1. Install in the reverse order of removal.

NOTE:

1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
2. Smear and cover splines (B) with molybdenum type high pressure grease.

   GREASE SPL-1 or equivalent

   Fig 4: Locating O-Ring

   Courtesy of HYUNDAI MOTOR AMERICA
3. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.

Fig 5: Installing Propeller Shaft To Runout Marking

Courtesy of HYUNDAI MOTOR AMERICA