Repair Procedures: Removal

[Gasoline 2.0 GDI] 

1. Remove the following :
   • Sub frame assembly

     (Refer to Suspension System - "SUB FRAME ")

   • Drive shaft assembly.

   (Refer to Driveshaft and axle - "FRONT DRIVESHAFT ")

2. Remove the propeller shaft (A).

   Tightening torque: 

   49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)

   Fig 1: Removing Propeller Shaft

   Courtesy of HYUNDAI MOTOR AMERICA
3. Loosen the transfer upper & lower mounting bolts. (transfer side → transaxle side)
   Fig 2: Loosening Transfer Upper & Lower Mounting Bolts (1 Of 2)

   Courtesy of HYUNDAI MOTOR AMERICA
   Fig 3: Loosening Transfer Upper & Lower Mounting Bolts (2 Of 2)

   Courtesy of HYUNDAI MOTOR AMERICA
4. Loosen the transfer lower mounting blot. (transaxle side → transfer side)
   Fig 4: Loosening Transfer Lower Mounting Bolt

   Courtesy of HYUNDAI MOTOR AMERICA
5. Remove the transfer assembly.

[Gasoline 1.6 T-GDI] 

1. Remove the propeller shaft (A).

   Tightening torque: 

   49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)

   Fig 5: Removing Propeller Shaft

   Courtesy of HYUNDAI MOTOR AMERICA
2. Loosen the transfer assembly mounting bolts (A).
Fig 6: Removing Transfer Assembly Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
3. Remove the transfer assembly (B).
   Fig 7: Removing Transfer Assembly

   Courtesy of HYUNDAI MOTOR AMERICA