LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior Trim And Glass >> Crash Pad >> Repair Procedures >> Replacement >> Cluster Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cluster Replacement

CAUTION:
  • A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the cluster fascia lower panel (A).
    Fig 1: Removing Cluster Fascia Lower Panel
    G12125914Courtesy of HYUNDAI MOTOR AMERICA
  2. After loosening the mounting screws, then remove the cluster fascia upper panel (A).
    Fig 2: Removing Cluster Fascia Upper Panel
    G12125915Courtesy of HYUNDAI MOTOR AMERICA
  3. After loosening the mounting screws, then remove the cluster assembly (A).
    Fig 3: Removing Cluster Assembly
    G12125916Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the connector (A).
    Fig 4: Disconnecting Connector
    G12125917Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.
NOTE:
  • Make sure the connectors are connected in properly.
  • Replace any damage clips.
scientia non olet · About LEMON Manuals