LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 3) - 1.6L GDI >> DTC P0564: Cruise Control Multi-Function Input A Circuit >> Component Inspection >> Check Auto Cruise Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Auto Cruise Switch

  1. IG "OFF" and disconnect Cruise switch connector.
  2. Measure resistance between signal and power terminals of Cruise switch connector with each switch depressed. (Component side)
  3. Measure resistance between signal and ground terminals of Cruise remocon connector with each switch depressed. (Component side)

    Specification: 

    Item Resistance (Ω)
    ON/OFF switch 3.9 kΩ ± 5%
    SET switch 220 Ω ± 5%
    RESUME switch 910 Ω ± 5%
    CANCEL switch 0 Ω ± 5%
  4. Is the measured resistance within specification?

    YES 

    • Substitute with a known - good ECM and check for proper operation. If the problem is corrected, replace ECM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Substitute with a known - good auto cruise switch and check for proper operation. If the problem is corrected, replace auto cruise switch and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals