Shift/Select Cable Installation Tips

Install the select and shift cable assembly (B) after removing the pin (A).

Fig 1: Locating Pin, Select And Shift Cable Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Install is the shift cable (A).
CAUTION: At this time, have to disconnect select cable.

Fig 2: Locating Shift Cable
Courtesy of HYUNDAI MOTOR AMERICA
Install is the shift lever assembly (A).
Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 3: Locating Shift Lever Assembly With Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Shift to the 3th gear position.
Insert the selected cable (A) to the shift lever assembly pin (B).
You have to push in the adjuster (C).
Remove the neutral position pin (D).
Install the snap pin (E).

Fig 4: Locating Selected Cable, Shift Lever Assembly Pin, Neutral Position Pin & Snap Pin

Courtesy of HYUNDAI MOTOR AMERICA