LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Veloster Value Edition >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Antilock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis >> DTC C1702: Variant Coding Error >> DTC Inspection >> GDS Data Analysis >> Variant Code Reset
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Variant Code Reset

  1. Check for improper installation of ECM/TCM/ESC/4WD/DCT/ACU/EPB ECU.
  2. Check for wrong 4WD ECU installation.
  3. Check for wrong G sensor installation.
  4. Check for wrong DCT ECU installation.
  5. Check for wrong TCM installation.
  6. Check for wrong EPB ECU installation.
  7. Connect GDS to Data Link Connector.
  8. IG "ON".
  9. Perform variant code reset in Vehicle S/W Management menu of the GDS. (Fig 1)
  10. IG "OFF" and wait for about 10 seconds, and then IG "ON". Go to "COMPONENT INSPECTION " Procedure.
Fig 1: Screen Display - Variant Code Reset In Vehicle S/W Management Menu Of GDS
G12122294Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals