Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the steering wheel assembly.
Remove the screws from the steering back cover (A).

Fig 1: Removing Screws From Steering Back Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the steering remote control connector (A).

Fig 2: Steering Remote Control Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the steering remote control (A) after loosening the screws.

Fig 3: Steering Remote Control

Courtesy of HYUNDAI MOTOR AMERICA