LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Ioniq Plug-In Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (PHEV) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air cleaner assembly

    (Refer to "AIR CLEANER ")

  3. Disconnect the manifold absolute pressure sensor connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    G12727129Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals