LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Santa Fe SE Ultimate, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the air duct.

    (Refer to "AIR CLEANER ")

  3. Disconnect the solenoid valve connector (A).
    G12034309Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.