Repair Procedures: Removal

Remove the driveshaft and axle.
(Refer to Driveshaft and axle - "FRONT DRIVESHAFT ")
Remove the propeller shaft (A).
Tightening Torque:

49.0~68.6 N.m (5.0~7.0 kgf.m, 36.2~50.6 lb-ft)

Fig 1: Removing Propeller Shaft
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer upper & lower mounting bolts. (transfer side → transaxle side)

Fig 2: Loosening Transfer Upper & Lower Mounting Bolts (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Loosening Transfer Upper & Lower Mounting Bolts (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer lower mounting blot. (transaxle side → transfer side)

Fig 4: Loosening Transfer Lower Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA