ECM Neutral Mode Procedure (With Immobilizer)
- After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed.
[If installing a used ECM]
- Perform
"ECM Neutral Mode" procedure using KDS/GDS. Refer to NEUTRALIZING OF ECM
(Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")
- After finishing "ECM Neutral Mode", perform
"Key Teaching" procedure using KDS/GDS. Refer to TEACHING PROCEDURES
(Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")
[If installing a new ECM]
- Perform
"Key Teaching" procedure using KDS/GDS. Refer to TEACHING PROCEDURES
(Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")