Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Open the sunglass case cover from the overhead console and remove the 2 screws holding the overhead console. Disconnect the switch connector and Map lamp connector, and then remove the overhead console lamp (A).

Fig 1: Removing Overhead Console Lamp Screws
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Disconnecting Switch Connector And Map Lamp Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Remove the overhead console cover (A) after loosening the screws.

Fig 3: Removing Overhead Console Cover Screws
Courtesy of HYUNDAI MOTOR AMERICA
Check the continuity of between terminals.

Fig 4: Locating Mic Connector Terminals

Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Mic Circuit

Courtesy of HYUNDAI MOTOR AMERICA