Component Inspection
- Replace the HO2S.
- Clear DTC with GDS.
- Start the engine and warm it up until the radiator fan comes on (more than at least 10 minutes).
- Drive at a steady speed between 45-55 mph (72-88 km/h) for 120 sec.
- Stop and then maintain idle state.
- Check if O2 sensor monitoring readiness is complete.
- Does the GDS show DTC P013900?
YES
- Replace the ECM with an usable one and check for proper operation. If the problem is corrected, replace the ECM and then go to "Verification of Vehicle Repair ".
NO
- Troubleshooting is finished.