LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2019 >> Accent SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transaxle Control System) >> Transaxle Control Module (TCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Oil-pressure characteristics backup (TCM exchange)
    G12598968Courtesy of HYUNDAI MOTOR AMERICA
    G12598969Courtesy of HYUNDAI MOTOR AMERICA
    G12598970Courtesy of HYUNDAI MOTOR AMERICA
  2. Turn ignition switch OFF.
  3. Disconnect the negative (-) battery cable.
  4. Disconnect the TCM connector (A).
    G12598971Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the battery.

    (Refer to Engine Electrical System - "BATTERY ")

  6. Remove the bolts (A) and nut (B).
  7. Remove the TCM (C).
G12598972Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals