LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2019 >> Elantra Value Edition >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (3 Of 3) >> DTC P061A-00: Internal Control Module Torque Performance >> DTC Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Check RAM Area/Communication connections
  1. Contact resistance in connectors
  2. Faulty PCM
Enable Conditions
  • Ignition "ON" or engine running
  • Engine speed during engine start is higher than 32 RPM
Threshold Value
  • Actual value is higher or lower than allowable range

    (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
Diagnostic Time
  • 0.48 seconds
MIL On Condition
  • 1 Driving Cycles
scientia non olet · About LEMON Manuals