Blind Spot Collision Warning DTCS
BLIND SPOT COLLISION WARNING DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | 17: Battery Voltage High |
| DTC C1102 | 16: Battery Voltage Low |
| DTC C120A | 11: Warning LED Right Circuit Short to Ground |
| DTC C120B | 15: Warning LED Right Circuit Short to Battery or Open |
| DTC C120C | 11: Warning LED Left Circuit Short to Ground |
| DTC C120D | 15: Warning LED Left Circuit Short to Battery or Open |
| DTC C1501 | 01: Activation Switch signal stuck low |
| DTC C150A | 15: Activation Switch module Short to Battery or Open |
| DTC C160A | 88: Local CAN Bus Off |
| DTC C1611 | 87: CAN Time-out EMS |
| DTC C1612 | 87: CAN Time-out TCU |
| DTC C1613 | 81: CAN Signal failure - EMS |
| DTC C1616 | 88: CAN Bus OFF (C-CAN) |
| DTC C1623 | 87: CAN Time-out SAS |
| DTC C1625 | 87: CAN Time-out ESC |
| DTC C1628 | 87: CAN Time-out CLU |
| DTC C1633 | 81: CAN Signal Failure - CLU |
| DTC C1646 | 81: CAN Signal Failure - TCU |
| DTC C1657 | 87: CAN time-out ESC |
| DTC C166A | 87: CAN Time-out LANE info |
| DTC C1671 | 81: CAN signal failure - ESP |
| DTC C1672 | 81: CAN signal failure - SAS |
| DTC C1675 | 81: CAN signal failure - WHL_SPD |
| DTC C1687 | 87: CAN Time-out MDPS |
| DTC C1688 | 81: CAN signal failure - MDPS |
| DTC C1693 | 81: CAN signal failure - ESC |
| DTC C1702 | 05: Variant Coding Error |
| DTC C170A | 11: Activation Switch LED Circuit short to ground |
| DTC C170B | 12: Activation Switch LED Circuit short to battery or open |
| DTC C170C | 04: ECU Hardware error (REAR RIGHT) |
| DTC C170D | 04: ECU Hardware error (REAR LEFT) |
| DTC C1735 | 4B: Overtemperature |
| DTC C1743 | 05: SW mismatch |
| DTC C1812 | 87: CAN Time-out CGW |
| DTC C1816 | 87: CAN time-out SJB |
| DTC C2702 | 54: Master Sensor Control Module Missing Calibration |
| DTC C2703 | 54: Slave Sensor Control Module Slave Missing Calibration |