LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Button Engine Start System) >> Start/Stop Button >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Disconnect the start/stop button connector (B) after removing the center fascia garnish (A).
    G13038221Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the start/stop button (A) after removing the screws (3EA).
    G13038222Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals